Audac - CAP248 -Tweekanaals eindversterker 2 x 480W
° RMS-vermogen: 2x480 W
° TDH+N: <0,3%
° Signaal/ruis: >100 dB
° Frequentiebereik: 50 Hz - 22 kHz
° Uitgangsspanning: 70/100 V
Interne referentie:
CAP248
Beschrijving:
The CAP series are professional 100V multi-channel power amplifiers. The CAP224 offers two channels and has an output power of 240 Watt. This way, a flexible solution is created for multi-zone audio distribution systems with two independent zones. They are designed as no-nonsense amplifiers with only the necessary controls and connections which creates great simplicity in use and installation.
A high efficiency and reliability of the device is achieved by using switching power supplies in combination with Class-D amplifier technology. A temperature controlled fan constantly keeps all parts within the right operation range while avoiding excessive buzz. A built-in multipurpose protection circuit protects against DC malfunction, short circuit, overheating, overload and limits the signal when necessary.
The input connections are performed using balanced XLR connectors and link output connectors are provided for link through to other amplifiers. Besides, a high-pass filter switch (400 Hz) and a gain adjustment potentiometer are provided for each channel. The output connections are performed using reliable terminal block connectors and this all is housed into a solid constructed, double rack space (2 HE) 19” rack mounting housing.
Specificaties
| Aantal Kanalen | 2 |
| Speaker Output | High Impedance (70V / 100V) |
| Dante | Nee |
| RS232 | Nee |
| Merk | Audac |
CAP248 – Dual-channel power amplifier 2 x 480W 100V
Highlights
- High-pass filter switch
- XLR input & linkthrough connections with gain control & HPF switch
- Terminal block output connections
- Lightweight class-D amplifier
- Advanced protection circuit
Description
The CAP series are professional 100V multi-channel power amplifiers. The CAP248 offers the two channels and has an output power of 480 Watt. This way, a flexible solution is created for multi-zone audio distribution systems with two independent zones. They are designed as no-nonsense amplifiers with only the necessary controls and connections, which creates great simplicity in use and installation. A high efficiency and reliability of the devices is achieved by using switching power supplies in combination with Class-D amplifier technology. A temperature controlled fan constantly keeps all parts within the right operation range, while avoiding excessive buzz. A built-in multipurpose protection circuit protects against DC malfunction, Short circuit, overheating, overload and limits the signal when necessary. The input connections are performed using balanced XLR connectors and Link output connectors are provided for link through to other amplifiers. Besides, a high-pass filter switch (400 Hz) and a Gain adjustment potentiometer are provided for each channel. The output connections are performed using reliable terminal block connectors and this all is housed into a solid constructed, double rack space (2 HE) 19” rack mounting housing.
Applications
- Bars & Restaurants
- Education
- Clubs
- Corporate
- Retail
System specifications
| Property | Value |
|---|---|
| Continuous power (AES) | 2 x 480 W |
| Frequency / Response (± 3 dB) | 50 Hz - 22 kHz |
| Signal / Noise | > 100 dB |
| THD+N (@ 1 kHz) | |
| Crosstalk (@ 1 kHz) | |
| Technology | Class-D |
| Power / Supply | Switching mode |
| Power / Source | 230 ~ 240 V AC / 50 Hz |
| Inputs / Sensitivity | -0.5 dB ~ 10.5 dB |
| Inputs / Connector | XLR female with Male Linkthrough |
| Inputs / Impedance | 10 kΩ balanced |
| Outputs / Voltage / Impedance | 100 V / 21 Ω |
| Outputs / Connector | 4-pin Euro Terminal Block (Pitch - 5.08 mm) |
| Common mode rejection ratio | 70 dB |
| Protection | DC Short circuit |
| Protection | Over heating |
| Protection | Over load |
| Protection | Signal limiting |
| Cooling | Temperature controlled fan |
| Operating temperature | 0° ~ 40° @ 95% Humidity |
Product Features
| Property | Value |
|---|---|
| Dimensions | 482 x 88 x 420 mm (W x H x D) |
| Weight | 7.500 kg |
| Mounting | 19” |
| Unit height | 2 HE |
| Construction | Steel |
| Colours | Black |
| Accessories / Included | 2 x 4-pin Euro Terminal Block outputs connector |
| Accessories / Optional | CPE100 Rack mount handles |
Product attributes
- Impedance: 21 Ω, High impedance (100 V)
- Output channels: 2
Key features
- Warranty: 5 years
Related Products
- CLA530
Categories
- CAP series / Amplifiers / By Series / Audio Equipment
- CAP series / Power efficient amplifiers / Power amplifiers / Non network control amplifiers / Amplifiers / By Category / Audio Equipment
- CAP series / Power efficient amplifiers / Power amplifiers / Soveno family / By Family / Audio Equipment