Audac - CEP408 -Quad kanaals 4 Ohm versterker 4 x 80W 70/100V
° RMS-vermogen: 4x80 W
° THD + N: <0,01ù
° Signaal/ruis: >100 dB
° Frequentiebereik: 20 Hz - 20 kHz
° Uitgangsspanning/impedantie: 70V/100V/4Ω
Interne referentie:
CEP408
Beschrijving:
The CEP series are professional 70/100V multi-channel energy-efficient amplifiers. The one unit height device comes into two models. The CEP408 offers four channels and has an output power of 80 Watt. Both low impedance as 70/100V, deliver high-quality amplification distributed over multiple zones in various applications. With its compact and lightweight design, the CEP series is designed with high efficiency and reliability by providing input linking through miniature switches at the back of the device in combination with Class-D amplifier technology. These switches allow daisy linking inputs from one channel to another by simply pressing the switch.
The highly efficient Class-D amplifier technology delivers an uncompromised sound experience in the most effective way. The input connections are performed with 3-Pin Terminal block connectors while the output connections are performed with a 4-pin Terminal block connector.
The multi-channel amplifier is Energy Star compliant yet can be enabled or disabled with a standby switch on the back of the device. This amplifier is an HE (1RU) 19” unit. In order to ensure maximum installer/maintenance convenience, the CEP is passively cooled.
Specificaties
| Aantal Kanalen | 4 |
| Speaker Output | High Impedance (70V / 100V), Low Impedance (2ohm - 16ohm) |
| Dante | Nee |
| RS232 | Nee |
| Merk | Audac |
CEP408 – Quad channel 4 Ohm energy-efficient amplifier - 4 x 80W - 70/100V
Highlights
- Energy star certified
- Terminal block input connections
- Terminal block output connections
- Input linking through miniature switches
- Class-D amplifier technology
- Compact and lightweight design
Description
The CEP series are professional 70/100V multi-channel energy-efficient amplifiers. The one unit height device comes into two models. The CEP408 offers four channels and has an output power of 80 Watt. Both low impedance as 70/100V, deliver high-quality amplification distributed over multiple zones in various applications. With its compact and lightweight design, the CEP series is designed with high efficiency and reliability by providing input linking through miniature switches at the back of the device in combination with Class-D amplifier technology. These switches allow daisy linking inputs from one channel to another by simply pressing the switch.
The highly efficient Class-D amplifier technology delivers an uncompromised sound experience in the most effective way. The input connections are performed with 3-Pin Terminal block connectors while the output connections are performed with a 4-pin Terminal block connector.
The multi-channel amplifier is Energy Star compliant yet can be enabled or disabled with a standby switch on the back of the device. This amplifier is an HE (1RU) 19” unit. In order to ensure maximum installer/maintenance convenience, the CEP is passively cooled.
Applications
- Bars & Restaurants
- Corporate
- Education
- Retail
System specifications
| Property | Value |
|---|---|
| Inputs / Connector | 3-pin Euro Terminal Block (Pitch - 3.81 mm) |
| Outputs / Connector | 4-pin Euro Terminal Block (Pitch - 5.08 mm) |
| Inputs / Connector | IEC C14 Connector |
| Power / Supply | 100 ~ 240V AC mains operation voltage |
| Continuous power (AES) | 4 x 80 W |
| Inputs | Input linking through miniature switches |
| Signal / Noise | > 100 dB |
| THD+N (@ 1 kHz) | |
| Crosstalk (@ 1 kHz) | |
| Technology | Class-D |
| Protection | DC Short circuit |
| Protection | Over heating |
| Protection | Over load |
| Protection | Signal limiting |
| Cooling | Convection cooled |
| Operating temperature | 0° ~ 40° @ 95% Humidity |
| Frequency / Response (± 3 dB) | 110 Hz - 20 kHz |
| Power / Supply | Switching mode |
| Power / Source | 100 ~ 240 V AC / 50 ~ 60 Hz |
| Power / Consumption / Standby | 0.6 W |
| Power / Consumption / Idle | 16.4 W |
| Power / Consumption / Nominal (1/3 MUP) | 196 W |
| Power / Consumption / Nominal (1/8 MUP) | 92 W |
| Inputs / Sensitivity | -0.5 dB ~ 10.5 dB |
| Inputs / Impedance | 10 kΩ balanced |
| Inputs / Connector | 3-pin Euro Terminal Block (Pitch - 3.81 mm) |
| Continuous power (AES) / @ 70 V | 4 x 80 W |
| Continuous power (AES) / @ 100 V | 4 x 80 W |
| Outputs / Voltage / Impedance | 4 Ω |
| Outputs / Voltage / Impedance | 70 V / 62.5 Ω |
| Outputs / Voltage / Impedance | 100 V / 125 Ω |
Product Features
| Property | Value |
|---|---|
| Mounting | 19” |
| Unit height | 1 HE |
| Colours | Black |
| Dimensions | 482 x 44 x 355 mm (W x H x D) |
| Weight | 6.3 kg |
| Construction | Steel |
Product attributes
- Continuous power per channel @ 4 Ω stereo: 80 W
- Continuous power per channel @ 70/100V: 80 W
- Brand: AUDAC
- Features: Energy star rating
- Impedance: 4 Ω, High impedance (70 & 100V)
- Output channels: 4
Key features
- Certification: Energy Star
- Warranty: 5 years
Categories
- CEP series / Amplifiers / By Series / Audio Equipment
- CEP series / Power efficient amplifiers / Power amplifiers / Non network control amplifiers / Amplifiers / By Category / Audio Equipment
- CEP series / Power efficient amplifiers / Power amplifiers / Soveno family / By Family / Audio Equipment